STELPRO

Don't see what you're looking for?

Fill out the from here and we'll take care of you right away. Or call us at 415.582.6701


 Dwelo STELPRO Thermostat
 

+ How do I change the thermostat mode?

A Stelpro thermostat is for heating only. Simply adjust the target temperature to a number higher than the actual temperature. The target temperature is the smaller number displayed beneath the larger actual temperature number.

+ How do I change the target temperature?

Press the “up” and “down” arrow buttons until the target temperature reaches your desired temperature. The target temperature is the smaller number displayed beneath the larger actual temperature number.

The minimum set point is 41°F (5°C) and the maximum set point is 86°F (30°C).

+ How do I change the fan mode?

There is no fan mode on the Stelpro thermostat.

+ Why does the thermostat show a snowflake symbol?

This indicates the thermostat's target temperature is set below 45°F (7°C) and water pipes may be subject to freezing.

+ What are the vertical bars on the right side of the screen?

This is a heating status graph. Whenever the thermostat is actively heating a room, the heating status graph will display the heating percentage. It's roughly correlated with heating power.

  • No bar: 0%
  • 1 bar: 1-25%
  • 2 bars: 26-50%
  • 3 bars: 51-75%
  • 4 bars: 76-100%